Windows Hotspot Not Working? Create Wi-Fi Hotspot via BAT File in 3 steps

Introduction: Windows Hotspot Not Working

Experiencing issues with your Windows Hotspot not working? No worries! In this guide, we will address common problems with Windows Hotspot and provide you with a step-by-step solution to create a Wi-Fi hotspot using a BAT file.

Troubleshooting Windows Hotspot Not Working

1. Check Hardware Compatibility: Ensure that your computer has a compatible Wi-Fi adapter capable of creating a hotspot. Not all network adapters support this feature.
2. Update Network Drivers: Outdated or corrupted network drivers can cause hotspot problems. Update your Wi-Fi adapter drivers to the latest version.
3. Restart the Network Sharing Service: Sometimes, the Network Sharing Service encounters errors. Restart the service to resolve any issues.
4. Disable and Enable Wi-Fi: Toggle your Wi-Fi adapter off and on to reset the network settings.
5. Run Network Troubleshooter: Use the built-in Network Troubleshooter to automatically detect and fix hotspot-related problems.

Creating Wi-Fi Hotspot via BAT File

If above-Listed point does not work then you can Create Wi-Fi Hotspot via the BAT File

1. Open Notepad: Press “Windows + R,” type “notepad,” and hit Enter to open Notepad.
2. Create the BAT Script: Copy and paste the following commands into Notepad

@echo off
set ssid=MyWiFiHotspot
set key=MyPassword123
netsh wlan set hostednetwork mode=allow ssid=%ssid% key=%key%
netsh wlan start hostednetwork
echo Wi-Fi hotspot created successfully.
pause

Let’s analyze the code present in the .bat file

The first line, @echo off, ensures that the commands in the .bat file are not displayed in the command prompt, resulting in a cleaner output.

The set ssid=MyWiFiHotspot line sets the SSID (Service Set Identifier), which is the name of your Wi-Fi hotspot. You can customize the hotspot name by changing “MyWiFiHotspot” to a name of your choice.

Next, the set key=MyPassword123 line sets the password for your Wi-Fi hotspot. Replace “MyPassword123” with a strong password of your choosing. A strong password typically includes a combination of uppercase and lowercase letters, numbers, and special characters.

The subsequent lines utilize the netsh command to set up and start the Wi-Fi hotspot. The netsh wlan set hostednetwork mode=allow ssid=%ssid% key=%key% line configures the hosted network mode with the specified SSID and password.

The netsh wlan start hostednetwork line starts the Wi-Fi hotspot, enabling other devices to connect to it.

Lastly, the echo Wi-Fi hotspot created successfully. line displays a success message in the command prompt, indicating that the hotspot has been created. The pause command keeps the command prompt window open until you press a key, allowing you to view the output.

Customizing the Hotspot Settings 

The .bat file allows you to customize various settings according to your preferences. Let’s take a closer look at these settings:

• SSID (Hotspot Name): To change the SSID or the name of your hotspot, modify the set ssid=MyWiFiHotspot line. Replace “MyWiFiHotspot” with your desired name. Choose a name that is unique and easily identifiable.

• Password: The set key=MyPassword123 line sets the password for your Wi-Fi hotspot. Replace “MyPassword123” with a strong and secure password. Make sure to use a combination of letters (both uppercase and lowercase), numbers, and special characters. A strong password adds an extra layer of security to your hotspot, preventing unauthorized access.

By customizing the SSID and password, you can personalize your Wi-Fi hotspot and ensure that it meets your specific requirements.

Saving and Running the .bat File 

Once you have customized the hotspot settings, it’s time to save the .bat file and run it. Follow these steps:

• Open a text editor (e.g., Notepad) and paste the code mentioned earlier into a new file.

• Click on “File” and select “Save As.”

• Choose an appropriate location to save the file.

• In the “Save as type” field, select “All Files” and name the file with a .bat extension (e.g., create_hotspot.bat).

• Click “Save” to save the .bat file.

To run the .bat file and create your Wi-Fi hotspot, simply double-click on the file. This action will open a command prompt window and execute the necessary commands. Once the process is complete, you’ll see a success message in the command prompt.

Conclusion: Windows Hotspot Not Working

Creating a Wi-Fi hotspot using a .bat file offers a convenient and efficient way to share your internet connection with other devices. Whether you’re on the go, at home, or in the office, this method allows you to set up a hotspot with just a few clicks.

Remember to customize the SSID and password in the .bat file to ensure your hotspot reflects your preferences. Additionally, use a strong password to safeguard your hotspot against unauthorized access.

Please note that it’s important to comply with local regulations and ensure that you have permission to create a Wi-Fi hotspot in your specific location. It’s also essential to exercise caution when sharing your internet connection, as it may impact your network’s performance and data usage.

If you are searching for Wifi Dongle then your search ends here these are the top 5 Wifi dongles with one tap Amazon link